Eagle Electronics CUDA 242 - Manual (Page 55)

51
depth has been entered in the dialog box. To move the cursor back to
any of the previously entered numbers, press
UP MENU
. Otherwise,
press
PWR
to return to the Shallow Alarm menu. Use ↑ to select
O
N
,
which will turn on the alarm, then press
PWR
to clear the menu. When
the bottom depth becomes shallower than the alarm’s setting, an alarm
will sound and a message will appear on the screen.
Press
PWR
to silence the alarm. It will remain silent until it is trig-
gered again.
To turn off the alarm, repeatedly press
MENU
until the
S
HALLOW
A
LARM
menu appears. Press ↓ to
O
FF
, then press
PWR
to clear the menu.
Deep Alarm
To set the deep alarm depth, press
MENU
repeatedly until
D
EEP
A
LARM
appears.
Deep Alarm dialog box (left). Deep Alarm menu (right).
Press the ↓ to
S
ET
V
ALUE
. The Deep Alarm Value dialog box will appear.
Use ↓ to enter the first number in the dialog box, then press
DOWN
MENU
to move to the next digit. Repeat those steps until the desired
depth has been entered in the dialog box. To move the cursor back to
any of the previously entered numbers, press
UP MENU
. Otherwise,