Eagle Electronics CUDA 242 - Manual (Page 5)

1
Introduction
Thank you for buying an Eagle  sonar! Your unit is a high-quality so-
nar designed for both professional and novice fishermen. All Eagle so-
nars have an automatic mode that finds and displays the bottom, fish,
underwater structure and more – right out of the box. All you have to
do is press the on (
PWR
) key.
To get started with your Eagle sonar, first read the installation section.
It contains instructions for mounting the sonar unit, the transducer
and any optional accessories, such as a speed sensor.
Following recommended installation practices will pay off in optimum
performance of your Eagle sonar. Improper installation can cause
problems down the road, especially if the transducer is badly mounted.
After you've read the installation instructions, install the unit and ac-
cessories. Then, read the rest of the manual. The more you know about
your sonar, the better it will work for you.
Capabilities and Specifications: Cuda  242 & Cuda
242 Portable
General
Case size: .........................5.8" H x 4.3" W x 2.5" D (14.7 cm H x 10.8 cm
W x 6.6 cm D) sealed, waterproof; suitable for
saltwater use.
Display: ............................High-contrast Film SuperTwist LCD. Diago-
nal viewing area: 3.5" (8.9 cm).
Resolution: ......................240 pixels (vert.) x 160 pixels (horiz.) resolu-
tion; 38,400 total pixels
Backlighting: ..................incandescent backlit screen
Input power: ...................10 to 17 volts DC.