Eagle Electronics CUDA 242 - Manual (Page 54)

50
To turn on Fish I.D., press
MENU
until the
F
ISH
ID
menu appears. Press
↓ to select
O
N
, then press
PWR
. Press
MENU
until the
F
ISH
A
LARM
menu
appears. Press ↑ to select
O
N
, then press
PWR
.
To turn off fish alarm press
MENU
until
F
ISH
A
LARM
appears. Press ↑ to
select
O
FF
, then press
PWR
to clear the menu.
Depth Alarms
The depth alarms are triggered only by the bottom signal. No other
echoes will activate these alarms. The depth alarms consist of a shal-
low and a deep alarm. The shallow alarm sounds an alarm tone when
the bottom goes shallower than the alarm's setting. The deep alarm
sounds a tone when the bottom goes deeper than its setting. Both
alarms adjust the same way, although through different menus.
Shallow Alarm
To set the shallow alarm depth, press
MENU
repeatedly until
S
HALLOW
A
LARM
appears.
Shallow Alarm Value Dialog box (left). Shallow Alarm menu (right).
Press ↓ to
S
ET
V
ALUE
. The Shallow Alarm Value dialog box will appear.
Use ↑ ↓ to enter the first number in the dialog box, then press
DOWN
MENU
to move to the next digit. Repeat those steps until the desired