Energy Tech Laboratories EDP70 - Manual (Page 55)

MI00/10056 rev.1--05/2001-- page 55
INVERTER ALARMS
MESSAGE CONDITION
NOT CALIBRATED FAULT
PCB SUPPLY FAULT FAULT
OUT OF SYNC WARNING
DESATURATION FAULT
OVER TEMPERATURE FAULT
BYPASS SWITCH CLOSED FAULT
SHUTDOWN IMMINENT WARNING
DC VOLTAGE HIGH FAULT
DC VOLTAGE LOW WARNING
INVERTER NOT RUNNING FAULT
INVERTER INHIBITED FAULT
INVERTER BLOCKED FAULT
INVERTER VOLTS HIGH FAULT
INVERTER VOLTS LOW FAULT
OVERLOAD WARNING
STOP DUE TO OVERLOAD FAULT
CURRENT LIMIT WARNING
INV.ST. SWITCH FAULT FAULT
INV.FREQ.OUT RANG. 8% FAULT
INV. FEEDBACK FAULT FAULT
VERIFYING INV. FREQ. -
VERIFYING BATT. CONT. -
INV.FREQ.OUT 1% FAULT