beautypg.com

Trouble shooting, Problem possible cause what to do – Electrolux DS603 User Manual

Page 31

background image

25

Trouble shooting

Problem

Possible Cause

What to do

Continuous
beeping

A fault has occured.

Refer to the Fault codes section.

Intermittent
beeping

DishDrawer® is in pause
mode.

Close the DishDrawer® and press the

button.

DishDrawer® will
not start

Power supply is not
connected.

Connect the power supply.

The drawer is not properly
closed.

Ensure the drawer is firmly closed.

Lock feature is on.

Turn the Lock off. Hold down the

/

button until the

symbol

disappears from the LCD or the light
above the

/

button disappears.

button not pressed.

Press the

button.

Excess water in
the DishDrawer®

Drain hose(s) bent or
kinked.

Straighten the drain hose(s).

Blocked filters and/or drain
hose(s).

Clean the filter plate/drain filter. Unblock
the drain hose(s). Refer to the user
maintenance section.

Water marks on
the dishes

Insufficient rinse agent.

Ensure there is enough rinse agent in
the dispenser.

Rinse agent setting too
low.

Increase the rinse agent setting.

DishDrawer® overloaded/
incorrectly loaded.

Refer to the section on loading.

Insufficient or no salt in the
water softener.

Ensure there is enough salt in the water
softener and/or increase the water
softener setting.

Dishes did not
dry

Incorrect loading.

Ensure the dishes are not nesting
together.

Rinse agent depleted.

Refill the rinse agent dispenser.

Rinse agent setting too
low.

Increase the rinse agent setting.

Eco wash program used.

Choose a standard wash program.