Electrolux DS603 - Manual (Page 33)

27
Foaming Incorrect amount of
detergent. Refer to the detergent section or
consult the detergent manufacturer’s
instructions.
Too much egg in the wash
load. Increase the amount of detergent.
Rinse agent setting too
high. Decrease the rinse agent setting.
No detergent
dispensed Detergent was wet when
loaded. Clean the dispenser and ensure the
dispenser is dry when adding detergent.
Excessive motor
noise The filter plate and/or spray
arm is incorrectly placed. Refer to the user maintenance section
for details on correct placement.
No water in the motor area. This usually occurs on the first use or
when the DishDrawer® has not been
used for long periods of time. Run the
DishDrawer® through a wash program.
Water leaking Drain hose disconnected
from waste pipe. Reconnect the drain hose to the waste
pipe.
Supply inlet hose not
properly connected. Ensure the inlet hose is connected
securely.
Other leaks. Turn water and power supplies to the
DishDrawer® off. Call your dealer or
Authorized Service Agent.
DishDrawer® will
not open Childlock function is on or
the Closed Drawer option
is on, or both. Turn the Lock function off. Hold down
the
/ button until the symbol
disappears from the LCD or the light
above the
/ button disappears
and/or press the button to open the
DishDrawer®.
Problem Possible Cause What to do