Secondary installation – Enviro Ascot User Manual
Page 31
31
Secondary Installation
I
NSTALLATION
OF
L
OG
S
ET
AND
E
MBERS
:
The placement of the logs is not arbitrary. If they are positioned incorrectly, the flames can be “pinched”
and will not burn correctly. The burner come with four (4) locator pins (see Figure 48), and the bottom
logs have ledges which
make alignment easier.
Using
the
pictures
provided, carefully set the
logs in place.
NOTE: The logs are
fragile and should be
handled gently.
CAUTION: Use only
the type of ember
material supplied with
this appliance. Due to
the irregular size of the
ember material there may
be more than required.
The use of other foreign
materials on the burners
may create dangerous
conditions.
If over time, through
cleaning and servicing,
these embers require
replacement, contact the
nearest ENVIRO dealer
for replacement embers.
1. Carefully remove logs
from box. Check to
ensure there is no
damage. It is very
important to install all
logs in their proper
position to insure safe,
optimum
operating
conditions.
2. Place the log set into
the firebox. Locate
each log by seating it
down onto the burner
tray
support
pins.
Follow the figures to
the right for proper log
placement.
Figure 50. Log Placement Step 2.
Figure 49. Log Placement Step 1.
Figure 48. Ascot Burner Tray.