Operation, Driving safely – Polaris Series 11 Ranger User Manual

Page 41

OPERATION

Driving Safely

Driving Procedures

1. Sit in the driver’s seat with the seat belt fastened.

2. After starting the engine and allowing it to warm up, shift the

transmission into gear.

3. Check your surroundings and determine your path of travel.

4. Release the parking brake.

5. Keeping both hands on the steering wheel, slowly depress the

throttle with your right foot and begin driving. Vehicle speed is

controlled by the amount of throttle opening and Polaris Variable

Transmission (PVT) shifting is automatic.

6. Drive slowly. Practice maneuvering and using the throttle and

brakes on level surfaces.

NOTE: Low is the primary gear for operating this vehicle. High gear

is intended for use on hard-packed surfaces with light loads.