Polaris 2014 Ranger EV - Manual (Page 69)

67
MAINTENANCE
Storing the Vehicle
Any time the vehicle will be parked for more than a few hours, follow the recommended
storage procedures:
1. Make any necessary repairs and clean the vehicle. See page 64.
2. Clean the batteries. See page 63.
3. Store the vehicle out of the sun in a cool, dry place.
4. Be sure the storage area is well ventilated.
5. Turn the key off.
6. Do not set the park brake.
7. Verify that tire pressure is at specification.
8. Block the wheels to prevent rolling.
9. Fully charge the batteries. Leave the charger connected to maintain a full charge during
the storage period, or check battery voltage each month during storage and recharge as
needed to maintain a full charge. If the charger remains connected, check it monthly to
verify proper operation.
Tip: Do not use plastic or coated materials. They do not allow enough ventilation to prevent
condensation, and may promote corrosion and oxidation.
WARNING! Do not cover the vehicle while the charger is connected. Dangerous levels of hydrogen
gas could accumulate.
Removal from Storage
1. Inspect all battery connections.
2. Verify that batteries are fully charged.
3. Verify that tire pressure is at specification.
4. Perform the pre-ride inspection. See page 33.
5. Inspect and verify the tightness of the bolts, nuts and other fasteners.
6. Lubricate at the intervals outlined in the Periodic Maintenance Chart beginning on page
52.