Handlebar adjustments, The perfect fit – Polaris 2011 Widetrak IQ User Manual
Page 60
56
THE PERFECT FIT
Handlebar Adjustments
Use the following steps to adjust handlebar angle at the handlebar block.
1. Remove the mountain bar.
2. Remove the handlebar cover.
3. Using a 7/16" wrench, loosen
the four nuts on the bottom of
the adjuster block. Turn the
handlebar to the left or right for
access to the back nuts. If nec-
essary, pry the blocks apart
with a screwdriver.
4. Adjust the handlebar to the
desired height. Be sure the han-
dlebar, brake lever and throttle
lever operate smoothly and do
not hit the gas tank, windshield
or any other part of the
machine when turned fully to
the left or right.
5. Torque the front bolts first,
then torque the rear bolts.
Torque the bolts to 15-17 ft.
lbs. (20-23 Nm).
6. Reinstall the handlebar cover.
7. Reinstall the mountain bar.
Handlebar
Cover
Adjuster
Block
Bolts
Nuts
Mountain
Bar
- 2009 WideTrak IQ 2012 FS IQ WideTrak 2010 WideTrak IQ 600 IQ Widetrak 600 Widetrak IQ 2013 FS IQ WideTrak 2013 600 IQ WideTrak 2012 600 WideTrak IQ 2010 FST IQ Touring 600 IQ Touring 2013 600 IQ LXT 2011 600 WideTrak IQ 2013 550 IQ Shift 2013 550 IQ 136 2013 550 IQ LXT 2010 120 Dragon 2015 550 Indy Adventure 155 2015 550 Indy Voyageur 155 2016 550 Indy 2010 Trail Touring 2015 550 Indy 2016 550 Indy 144 2016 550 Indy LXT 144 2016 550 Indy Adventure 144 2016 550 Indy Adventure 155 2016 550 Indy Voyageur 144 2016 550 Indy Voyageur 155 2014 550 Indy 144 2014 550 Indy LXT 2014 550 Indy Adventure 2014 550 Indy Voyager