Maintenance, Battery – Polaris 2011 Widetrak IQ User Manual
Page 135
131
MAINTENANCE
Battery
Battery Storage
Whenever the vehicle is not used for a period of three months or more,
remove the battery from the vehicle, ensure that it's fully charged, and
store it out of the sun in a cool, dry place. Check battery voltage each
month during storage and recharge as needed to maintain a full charge.
Tip: Battery charge can be maintained by using a POLARIS Battery Tendert
charger (PN 2871076) or by charging about once a month to make up for
normal self-discharge. Battery Tendert can be left connected during the
storage period, and will automatically charge the battery if the voltage drops
below a pre-determined point.
Battery Charging
The following battery charging instructions apply only to the installa-
tion of a sealed battery. Read all instructions before proceeding with the
installation of this battery.
The sealed battery is already filled with electrolyte and has been sealed
and fully charged at the factory. Do not ever pry the sealing strip off or
add any other fluid to this battery.
The single most important thing about maintaining a sealed battery is to
keep it fully charged. Since the battery is sealed and the sealing strip
cannot be removed, you must use a voltmeter or multimeter to measure
DC voltage.
- 2009 WideTrak IQ 2012 FS IQ WideTrak 2010 WideTrak IQ 600 IQ Widetrak 600 Widetrak IQ 2013 FS IQ WideTrak 2013 600 IQ WideTrak 2012 600 WideTrak IQ 2010 FST IQ Touring 600 IQ Touring 2013 600 IQ LXT 2011 600 WideTrak IQ 2013 550 IQ Shift 2013 550 IQ 136 2013 550 IQ LXT 2010 120 Dragon 2015 550 Indy Adventure 155 2015 550 Indy Voyageur 155 2016 550 Indy 2010 Trail Touring 2015 550 Indy 2016 550 Indy 144 2016 550 Indy LXT 144 2016 550 Indy Adventure 144 2016 550 Indy Adventure 155 2016 550 Indy Voyageur 144 2016 550 Indy Voyageur 155 2014 550 Indy 144 2014 550 Indy LXT 2014 550 Indy Adventure 2014 550 Indy Voyager