Polaris 2004 Victory Kingpin - Manual (Page 51)

49
PRE-OPERATION CHECK
Check Electrical Equipment
Turn Signals
Move the turn signal switch to the left. The front and rear left turn signals and the turn signal indicator light on the
panel should flash. Push the switch button IN to cancel the turn signal. The turn signals and turn signal indicator
should stop flashing. Repeat the procedure for the right turn signals.
Emergency Flashers
Slide the emergency flasher switch to the left. All four turn signals and the turn signal indicator light on the panel
should flash. Slide the switch to the right. The turn signals and turn signal indicator should stop flashing.
Horn
Press the horn button. The horn should sound loudly.
Engine Stop/Run Switch
Be sure the engine stop/run switch stops the engine, or prevents the engine from starting when set to the STOP
position.
Notice If you regularly use this switch to shut off the engine, you’re already checking its operation each time
you use the motorcycle.