Polaris 2004 Victory Kingpin - Manual (Page 122)

120
MAINTENANCE
Seat Removal and Installation
There are two separate seats, the operator’s seat and the passenger seat. It is not necessary to remove the passenger
seat for regular maintenance. The passenger seat mounting screws are located on each side of the seat under the
side covers.
Always make sure the seats are securely fastened before riding the motorcycle. A loose seat could
cause a sudden shift in riding position, causing loss of control.
WARNING
1. Remove the right and left side covers.
2. Remove the fuse box from the bracket (see page 27).
3. Remove the screws located on the right and left sides of
the operator’s seat.
4. Lift the rear of the seat and pull rearward and up to
remove.
5. To reinstall the seat, place the seat in position on the
frame.
6. Push down on the rear of the seat until the screw holes
align.
7. Install the screws and tighten securely.
8. Reinstall the fuse box on bracket.
9. Install the left and right side covers.
1. Remove Side Covers
2. Remove Fuse Box and
Right Seat Screw
3. Remove Left Seat Screw
4. Lift Rear of Seat, Pull
Rearward
2
3
4