Polaris 2004 Victory Kingpin - Manual (Page 102)

A
B
100
MAINTENANCE
Fast Idle Lever and Cable
1. Move the fast idle lever. It should move smoothly from
its rest position to its completely open position and back
again. Measure fast idle lever free-play (A), which is
the amount of lever movement from the rest position to
the point of cable resistance.
Specification: 3-6mm, 1/8-1/4 in.
Fast Idle Lever Freeplay
2. If adjustment is necessary, remove seat (page 120) and
fuel tank (page 98).
3. Loosen the fast idle cable adjuster jam nut (B).
4. Turn the cable adjuster in or out until the fast idle lever
freeplay is 1/8-1/4 inch (3-6 mm).
5. Tighten the adjuster jam nut securely and reinstall the
fuel tank and operator’s seat.
6. Start the engine and let it idle with transmission in
NEUTRAL.
7. Turn the handlebars from full right to full left. If engine
RPM increases when bars are turned, re-check throttle
cable and fast idle cable adjustments, cable condition,
and routing. If problem persists contact your VICTORY
dealer.