Polaris 2002 Victory Touring Cruiser - Manual (Page 53)

Instruments and Controls
39
Clutch Lever
To disengage the clutch, pull the clutch lever toward the handlebar. To engage the clutch, gradually release the
clutch lever. For smooth clutch operation, pull the lever quickly and release it gradually.
Notice The motorcycle is equipped with a clutch interlock switch that prevents the engine from starting
when the transmission is in gear and the clutch is engaged (see page 62).
Multi--Function Display (MFD) Set Button
Use the MFD Set button in conjunction with the MFD Mode
button to control the features of the multi--function display
(see page 33).
Right Side Handlebar Controls
Engine Stop/Run Switch
The engine stop/run switch completes or interrupts the
ignition, starter, and fuel pump circuits. To complete the
circuits, allowing the engine to start and run, press the
lower portion of the engine stop/run switch (Run
position). To interrupt the circuits, press the upper portion of
the switch (Stop position). The engine should not start or run
when the switch is in the Stop position.
Use the engine stop/run switch to turn the engine off under
normal or emergency conditions.
1. Engine Stop/Run Switch
2. Emergency Flasher Switch
3. Starter Button
4. Throttle Control Grip
5. Multi--Function Display Mode Button
5
1
2
3
4