Polaris 2002 Victory Touring Cruiser - Manual (Page 106)

Maintenance
92
Lubricate Control Cables
The following cables used on the motorcycle require periodic lubrication for smooth operation and longevity:
S Throttle Cables
S Clutch Cable
S Fast Idle Lever Cable
1. Loosen the adjuster of the cable to be lubricated, and disconnect one end of the cable.
2. Lubricate the cable and the inside of the cable housing with Victory Cable Lube or a commercially
available cable lubricant.
3. Lubricate the cable end with Victory All Purpose Grease or equivalent.
4. Reconnect the cable and adjust as necessary.
Brakes
Check Front Brake Lever Movement
Squeeze the front brake lever toward the handlebar and release
it. It should move freely and smoothly and should return to its
rest position quickly when released. You should feel a firm
resistance in the lever within the first 3/4--inch (19 mm) of
lever travel.
If the brake lever travels too far before beginning to engage the
brake, see the Victory Service Manual, or contact an authorized Victory dealer for service.
3/4 inch
(19 mm)