Polaris 2002 Victory Touring Cruiser - Manual (Page 126)

Maintenance
112
2. Move the sidestand to its stored (up) position and remove the sidestand return spring.
Wear face protection. The sidestand return spring is under tension and can injure your eyes and
face when released.
WARNING
3. Remove the sidestand pivot bolt.
4. Remove any old grease and dirt from the sidestand, frame, and pivot bolt.
5. Lubricate the sidestand and pivot bolt with Victory All Purpose Grease or equivalent.
6. Reinstall the sidestand pivot bolt.
Torque: 35 ft--lbs (47 Nm)
7. Move the sidestand to its stored (up) position and reinstall the sidestand return spring.
Inspect Sidestand Pad
1. Check the condition of the sidestand rubber pad, and
make sure it is firmly attached to the sidestand.
2. Inspect the sidestand rubber pad for wear. Replace the
rubber pad if it is worn above the wear limit (see the
Victory Service Manual or an authorized Victory
dealer).
1. Sidestand
2. Rubber Pad
1
2