Polaris 2000 Victory Sport Cruiser - Manual (Page 48)

43
MAINTENANCE
Sidestand Pivot
1. Support the motorcycle in
an upright position.
2. Inspect the sidestand
spring for damage or loss of
tension.
3. Inspect the sidestand for
smooth movement.
Lubricate if necessary.
4. Inspect the sidestand pivot
bolt nut for proper torque
(36 ft. lbs. - 5.0 kg-m)).
5. Make sure that the
sidestand is not bent. If it is,
it must be replaced. Do not
attempt to straighten the
sidestand if it is bent.
6. Inspect the sidestand’s
rubber pad for wear. Be
sure the pad is secured
properly in place. Replace
the pad when it is worn
beyond the wear mark.
Wear Mark on Pad