Polaris 2000 Victory Sport Cruiser - Manual (Page 20)

15
CONTROL PARTS AND FUNCTIONS
Main Switch Controls
The main switch is located un-
derneath the gas tank on the
left--hand side. It controls the
ignition and lighting systems. Its
operation is described below:
ON:
Electrical circuits are
switched on, and the headlight,
meter light, taillight and front run-
ning lights come on. The engine
can be started. The key cannot
be removed in this position.
OFF: All electrical circuits are
switched off. The key can be re-
moved in this position.
PARK: To get the switch into park, you must push the key in while turning. When
the switch is in park, the taillights and running lights come on and the key can be
removed.
NOTE: Always turn the main switch “OFF” and remove the key when the motor-
cycle is unattended. Do not rely on the emergency stop switch for normal stop cir-
cumstances.
Multi-Function Display (MFD)
The speedometer is equipped
with an MFD window.
Using the trip function of the
MFD will allow you to determine
how far you can ride on a tank of
fuel. Each operator will get vary-
ing MPG depending upon riding
style and conditions. This infor-
mation will allow you to plan for
fuel stops.
Main Switch
MFD Window