Polaris 2014 ATV Sportsman X2 550 EPS - Manual (Page 58)

56
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Passenger seat lock-out Ensure proper operation 41
Brake system/lever travel Ensure proper operation 31
111
Brake fluid Ensure proper level 32
Auxiliary brake Ensure proper operation 34
Front suspension Inspect, lubricate if necessary 95
Rear suspension Inspect, lubricate if necessary 95
Steering Ensure free operation -
Tires Inspect condition and pressure 114
Wheels/fasteners Inspect, ensure fastener tightness 114
115
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 37
96
Coolant level Ensure proper level 109
110
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 30
134
Indicator lights/switches Ensure operation 28
Engine stop switch Ensure proper operation 28
Air filter, pre-filter Inspect, clean 116
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
29
118
Brake light/taillight Check operation, apply POLARIS
dielectric grease when lamp is
replaced
121
Riding gear Wear approved helmet, goggles, and
protective clothing
8
ADC Fluid Ensure proper level 104
Winch (if equipped) Inspect cable and switch 78-89