beautypg.com

Maintenance, Throttle body/idle rpm, Throttle cable freeplay – Polaris 2014 ATV Sportsman X2 550 EPS User Manual

Page 136

background image

134

MAINTENANCE

Throttle Body/Idle RPM

Idle RPM is preset by the manufacturer. If the engine idle speed is not
satisfactory, please see your POLARIS dealer for adjustment.

Throttle Cable Freeplay

1. Remove the four cover

screws from the right
handlebar control and
remove the cover.

2. With the handlebars

straight ahead, place very
light pressure on the
throttle lever. A gap of 2-3
mm should be visible
between the throttle arm
stop pin and the throttle
arm.

If adjustment is needed:

1. Locate the throttle cable

adjuster. Squeeze the end
of the rubber boot and slide
it back far enough to
expose the in-line cable
adjuster locknut.

2. Loosen the adjuster

locknut.

3. Rotate the boot to turn the

adjuster until 2-3 mm of
freeplay is achieved
between the stop pin and
the throttle arm. While
adjusting freeplay, flip the
throttle lever back and
forth repeatedly.

(continued on next page)

2-3 mm Gap

Throttle

Arm

Arm Stop Pin

Lock

Nut

Adjuster

Boot

Cable

Adjuster

This manual is related to the following products: