Electrolux EOB51000 - Manual (Page 18)

Problem Possible cause Remedy
The oven does not heat up The oven is not switched on Switch on the oven (refer to
chapter "Daily use").
The oven does not heat up The fuse in the fuse box is re-
leased Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
The oven lamp does not operate The oven lamp is defective Replace the oven lamp
Steam and condensation settle
on the food and in the oven cav-
ity You left the dish in the oven for
too long Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre. The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Environment concerns
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Warning! Refer to "Safety information"
chapter.
Packaging material
The packaging material is environmen-
tally-friendly and recyclable. Plastic parts
are marked with international abbrevia-
tions such as PE, PS, etc. Dispose of the
packaging material in the containers
provided for this purpose at your local
waste management facility.
Installation
Warning! Refer to "Safety information"
chapter. Important! The built-in unit must meet the
stability requirements of DIN 68930.
18 electrolux