Polaris 2012 ATV RZR 170 - Manual (Page 89)

86
MAINTENANCE
Cleaning and Storage
Washing the Vehicle
Keeping your POLARIS vehicle clean will
not only improve its appearance but it can
also extend the life of various components.
Before washing the vehicle, locate the CVT
inlet and outlet ducts. The ducts are located
under the rear wheel wells. Avoid spraying
water directly toward the ducts when wash-
ing the vehicle from the rear.
NOTICE: Water in the CVT system could cause
the drive belt to become wet and slip in
the clutches. Always avoid spraying
water directly toward the CVT inlet and
outlet ducts when washing the vehicle
from the rear.
High water pressure may damage
components. POLARIS recommends
washing the vehicle by hand or with a
garden hose, using mild soap.
Certain products, including insect repellents and chemicals, will
damage plastic surfaces. Do not allow these types of products to
contact the vehicle.
The best and safest way to clean your POLARIS vehicle is with a gar-
den hose and a pail of mild soap and water.
1. Use a professional-type washing cloth, cleaning the upper body first
and the lower parts last.
2. Rinse with clean water frequently.
3. Dry surfaces with a chamois to prevent water spots.
Washing Tips
• Avoid the use of harsh cleaners, which can scratch the finish.
• Do not use a power washer to clean the vehicle.
• Do not use medium to heavy duty compounds on the finish.
• Always use clean cloths and pads for cleaning and polishing. Old or
reused cloths and pads may contain dirt particles that will scratch the
finish.