Maintenance, Filter systems – Polaris 2012 ATV RZR 170 User Manual
Page 70

67
MAINTENANCE
Filter Systems
Air Filter
Always change the air filter at the inter-
vals outlined in the Periodic Maintenance
Chart beginning on page 53. Access the
air box through the access cover on the
forward surface of the rear body panel.
1. Move or remove the storage bag.
Remove the four (4) access cover fas-
teners to remove the access cover.
2. Release the air box cover spring clips
and remove the cover.
3. Loosen the air filter clamp. Remove
the air filter.
4. Clean away any oil or sediments in
the air box.
5. Apply a commercially available chas-
sis lubricant to the inside lip of the
new air filter. Install the filter and
tighten the clamp.
6. Reinstall the air box cover and secure
the clips.
NOTICE: Never operate the vehicle with the
filter element removed. Dirt will enter
the engine, causing rapid wear and
severe damage to the engine.
7. Reinstall the access cover and storage
bag.
Access Cover
Lubricant
Filter
- 2016 ATV RZR 170 2009 Ranger RZR 170 2010 RZR 170 2013 RZR 170 2011 RZR 170 2014 RZR 170 2010 RZR 2010 RZR EPS 2015 RZR 170 2009 Ranger RZR S 2010 RZR 4 2011 RZR 2011 RZR S 2011 RZR 4 2012 RZR 2012 RZR S 2012 RZR 4 2013 RZR 2013 RZR S 2013 RZR 4 2011 Ranger RZR XP 900 2012 RZR XP 900 2013 RZR XP 900 2013 RZR XP 4 900 2012 RZR 570 2013 RZR 570