Polaris 2012 ATV RZR 170 - Manual (Page 64)

61
MAINTENANCE
Transmission (Main Gearcase)
Always check and change the fluid at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 53. POLARIS recommends
the use of Premium AGL Synthetic Gearcase Fluid for this vehicle.
Fluid Check
The fill plug is located on the rear of the
gearcase. Access the fill plug through the
left rear wheel well. Maintain the fluid
level at the bottom of the fill plug hole.
1. Position the vehicle on a level surface.
2. Remove the fill plug.
3. Check the fluid level.
4. Add the recommended fluid as
needed.
5. Reinstall the fill plug.
Fluid Change
The drain plug is located on the bottom of the gearcase.
1. Remove the fill plug.
2. Place a drain pan under the drain plug.
3. Remove the drain plug. Allow the fluid to drain completely.
4. Clean the drain plug.
5. Reinstall the drain plug with a new o-ring. Torque to 11 ft. lbs. (15
Nm).
6. Add 23.7 oz. (700 ml) of the recommended fluid to the fill hole.
Maintain the fluid level at the bottom of the fill plug hole. Do not
overfill.
7. Reinstall the fill plug.
8. Check for leaks.
9. Discard used fluid properly.
Fill Plug