Grass Valley RSAT1 User Manual
Page 7
Satellite Panel RSAT1
1. General
2
Operating Instructions - Rev. 3 / 7.2002
In learn mode only one function per button or digipot is programmable. Delegation
functions are not available. Also, functions of the display panel RPV are not recor-
dable (at this time).
The programmable memory of the RSAT1 is part of the DD35. Thus the program-
med function set for the RSAT1 buttons can be switched from application to appli-
cation. More complex button sequences can be achieved by programmed recall of
macro buttons of the DD35 main panel.
The standard unit is equipped with 1x reconfigurable 9 Pin D-Sub interface for con-
nection to a host processor. Without further options the factory configuration is a
RS-422/485 port for direct connection to DD35’s panel controller.
Without further option RC 2309, serial port and DC inlet connectors are mounted
on the rear side of the panel (not bottom!).
Power supply via separate Power Supply unit necessary (e.g. Option RC 2313).
RSAT1 panel with power supply, cable, gender changer and mounting tools.