Grass Valley RSAT1 User Manual
Page 32
Satellite Panel RSAT1
6. Annex
Operating Instructions - Rev. 3 / 7.2002
27
Type
Data
Length
Comment
t
NN
4 + length(text)
text to be displayed in character displays
(not the TFT display!)
NN = (00..99) display number
NN == AD has a special meaning: it addresses all
displays in the device. (e.g. tADHello..)
readable control characters (if needed) must be
prefixed with the backslash (\).
e.g. “\\” => print ’\’
“\r” => CR (set cursor to top of disp)
“\n” => LF (clear disp)
“\t” => TAB (move cursor to fixed TABs
4, 8, 12, 16)
“\vv => ASCII char as a Hex value (\00...\7F)
M
NVVVV
7
(M)usic, activates beeper in the satellite panel.
N : 0 = normal beep, length of beep is
VVVV * 1mSec
1 = KeyClick on, length of click is
VVVV * 1mSec
2 = KeyClick off, VVVV has no meaning
l
VVVVVVVVVV
12
(lower case L)
switch all LEDs at one time
V = 0...F switch four LED’s (hexdecimal coded 1,2,4,8)
VVVVVVVVVV
IIIIIIIII+ Lamp: 39–36 (max LED=37)
IIIIIIII+– Lamp: 35–32
IIIIIII+–– Lamp: 31–28
IIIIII+––– Lamp: 27–24
IIIII+–––– Lamp: 23–20
IIII+––––– Lamp: 19–16
III+–––––– Lamp: 15–12
II+––––––– Lamp: 11–08
I+–––––––– Lamp: 07–04
+––––––––– Lamp: 03–00 (L00=1,L01=2,L02=4.L03=8)