Grass Valley LDK 4475 Reflex SuperXpander - Manual (Page 15)

LDK 4475 Reflex SuperXpander User’s Guide (v1.0) 15
Chapter 2 - Installation
2.3 Mounting a large lens
☞
Note
When a viewfinder support (for CRT viewfinders) is mounted, slide the support back towards
the front of the Reflex SuperXpander.
To mount the lens onto the Reflex SuperXpander, proceed as follows:
☞
Note
When the camera is already mounted (in transport position) remove the lens cap before
proceeding.
1. Hook the lens onto the support rail ensuring that the upper lens pin fits into the slot in the
support rail.
2. Swing the lens downwards so that the lower lens pin fits into the hole in the front of the
Reflex SuperXpander.
3. Turn the lens locking handle clockwise to secure the lens in place.
4. If a zoom control is used, attach the zoom control cable to the lens.
R EFLE X
SUPEREXPANDER
support rail
slot
lens support
rail
lens locking
handle
FRONT VIEW SIDE VIEW
lens interface
connector