Installation notices, Tripod installation – Grass Valley LDK 4475 Reflex SuperXpander User Manual

Page 10

Text mode
Original mode

LDK 4475 Reflex SuperXpander User’s Guide (v1.0)

Installation notices

For proper installation the following NEC articles should be noticed:

–

Installation of equipment (NEC article 800.18);

–

Avoid contact with conductors of other systems (NEC article 810.13);

–

Provide extensive, separate clearance requirements for indoor and outdoor locations
(NEC article 810.18).

Tripod installation

The typical configuration for this device (SuperXpander with Triax cables and 7-inch viewfinder
mounted) has proved to be stable when used on a tripod with the following specifications:
weight 24 kg (53 lbs), height 120 cm (47 in), leg distance at floor level of 135 cm (53 in).

Note that these values are recommendations only. Always check the mechanical stability of the
device before using it.