Grass Valley NV9641A v.1.0 - Manual (Page 29)

19
NV9641A
User’s Guide
Panel Options
The first panel option selects the behavioral model of the panel: XY/MD or paging. The panel
options differ between the two models. The default model is XY/MD mode.
Changing from one behavioral model to the other will erase the panel configuration. A confir-
mation warning appears when you make the change:
Options under XY/MD Model
This is the top part of the panel options section, as it appears at the right of a configuration page
under the XY/MD model:
Drop-Down Menus
These are its options:
Panel Behavior
Model XY/MD Mode The panel configuration uses the XY/MD model.
XY/MD supports a tree of button pages and allows the operator
the choice of X-Y mode (multiple levels, single destination) or MD
mode (all levels, multiple destinations) at any time.
Paging Mode The panel configuration uses the paging model.
Paging uses an ordered list of button pages and does not support
X-Y mode or MD mode. The paging model supports a limited X-Y
mode.
Default Mode X-Y Mode Starts the panel in XY mode after a reset.
a
Multi-Dest Mode Starts the panel in Multidest mode after a reset.
Release Mode Normal Release This panel can release “locks” and “protects” set by the designated
user (at this panel or any other panel).
Force Release This panel can release locks and protects set by any user.