Grass Valley Kayenne K-Frame Installation Planning Guide Dec 03 2014 - Manual (Page 48)

48 KAYENNE K-FRAME — Installation Planning Guide
Section 5 — Control Surface Cabling
Internal Cabling
CAUTION The RJ-45 connectors inside the Satellite Panel trays are used for proprietary
communications only. Ethernet devices may be damaged if plugged into
these connectors.
The Single Module Satellite Panel has internal module cabling the same as
the other Stripes. Simply plug the module into a port using the provided
cable.
The Double Module Satellite Panel has a similar internal cabling arrange-
ment, but one cable passes through a hole to the other tray.
Touch Screen Menu Panels (Used with PCU)
Connect a single or primary Menu Panel to the PUC Menu 1 connector, using
the supplied custom multi-pin cable. Connect an optional second Menu
Panel to the
Menu 2 connector. Menu Panels are assigned to suites during
system configuration.