Eagle Electronics FISHEASY 2T - Manual (Page 51)

47
ous times of the day. The default setting is 50 percent.
To adjust the contrast, press MENU DOWN until the S
YSTEM
menu ap-
pears, press UP ARROW , and the C ONTRAST
menu appears. To decrease
screen contrast, press the DOWN ARROW key. Press the UP ARROW key
to increase screen contrast. The bar graph in the Contrast menu box
shows a graph of the contrast. The screen will also show the effects of
the change. If you reach the maximum or minimum level, a tone sounds
alerting you to the limits. Press the
PWR key to clear the menu.
Display Contrast menu.
DEPTH UNITS OF MEASURE
This unit can show the depth in feet, fathoms or meters.
To change the depth units of measure, press MENU DOWN until the
S YSTEM
menu appears, press UP ARROW , then press MENU until the
D
EPTH
menu appears. Use the arrow keys to select the desired unit of
measure, then press the PWR key to clear the menu.
Depth menu controls the unit of measure used to show depth.