Eagle Electronics FISHEASY 2T - Manual (Page 48)

44
To turn Fish I.D. on, press MENU until the F
ISH
ID menu appears. Press
UP ARROW to select O N
, then press PWR .
To turn off the fish alarm without turning off fish symbols, press MENU
DOWN until F ISH A LARM
appears. Press DOWN ARROW to select O FF
, then
press PWR to clear the menu. Repeat the above steps to turn the alarm
back on, but press UP ARROW to select O N
before clearing the menu.
Fish Alarm menu.
Depth Alarms
The depth alarms are triggered only by the bottom signal. No other
echoes will activate these alarms. The depth alarms consist of a shallow
and a deep alarm. The shallow alarm sounds an alarm tone when the
bottom goes shallower than the alarm's setting. The deep alarm sounds
a tone when the bottom goes deeper than its setting. Both alarms ad-
just the same way, although through different menus.
Shallow Alarm
To set the shallow alarm depth, press
MENU DOWN repeatedly until
S HALLOW A LARM
appears.
Shallow Alarm menu.