Eagle Electronics FISHEASY 2T - Manual (Page 49)

45
Press UP ARROW to increase the shallow alarm's depth setting or press
DOWN ARROW to decrease it. The number in the shallow alarm’s menu
box shows the current shallow alarm setting. When the number reaches
the desired setting, press
PWR to clear the menu. When the bottom
depth goes shallower than the alarm’s setting, an alarm tone sounds
and a message box appears on the screen.
Press UP ARROW to silence the alarm. This turns the alarm sound off
until the shallow alarm is triggered again.
To turn the alarm off, press MENU DOWN repeatedly until S
HALLOW
A LARM
appears. Press DOWN ARROW until the words O FF F EET
appear,
then press PWR to clear the menu.
Deep Alarm
To set the deep alarm depth, press
MENU DOWN repeatedly until D EEP
A LARM
appears.
Press UP ARROW to increase the deep alarm's depth setting or press
DOWN ARROW to decrease it. The number in the deep alarm’s menu box
shows the current deep alarm setting. When the number reaches the
desired setting, press
PWR to clear the menu. When the bottom depth
goes deeper than the alarm’s setting, an alarm tone sounds and a mes-
sage box appears on the screen.
Deep Alarm menu.
Press UP ARROW to silence the alarm. This turns the alarm sound off
until the deep alarm is triggered again.
To turn the alarm off, press MENU DOWN repeatedly until D
EEP
A
LARM
appears. Press DOWN ARROW until the words O
FF
F
EET
appear, then
press PWR to clear the menu.