Grass Valley Kalypso Shot Box Option - Manual (Page 9)

Kalypso & Zodiak Shot Box Option Instruction Manual 9
Operation
Register Buttons
The 20 register buttons (labeled 0-19) correspond to the E-MEM registers
selected for the delegated bank and page. Pressing one of these buttons
selects that register for use. If
Auto Run is on, the register will also run auto-
matically.
Recalling Registers
To recall a different register from the same page range, simply press the 0 -
19 Shot Box button for the desired register.
To recall a register from a different page range, first specify the page and
then the register number (
Table 5 ).
Once a page is selected, subsequent registers can be recalled from that page
range with a single Shot Box register button press.
Run Buttons
The Run button runs the selected Master E-MEM register, just like pressing
a Run button on the Main panel. The Run button on the Shot Box does not
light for the duration of the effect, as the Run button does on the Main panel
(the Editor protocol does not support this). Instead, the Run button lights for
one second to indicate the command has been sent.
The Auto Run button works the same as on the Main panel. When on,
E-MEMs will run automatically when recalled from the Shot Box.
Readout Display
The Shot Box Readout display shows which bank and page is currently
selected, and which register was last selected from the shot box panel.
Figure 5. Examples of Recalling Registers from Different Pages
Register Button Presses
5 Page, 0, 5
15 Page, 0, 15
25 Page, 1, 5
79 Page, 3, 19
80 Page, 4, 0