Shot box option, Introduction, Features – Grass Valley Kalypso Shot Box Option User Manual
Page 5: Installation
Kalypso & Zodiak Shot Box Option Instruction Manual
5
Introduction
Shot Box Option
Introduction
The E-MEM Shot Box (
Figure 1
) is a separate panel that is designed for
rapidly recalling previously built effects.
Figure 1. Shot Box Control Panel
The Shot Box uses an Editor Port using the Editor protocol.
Features
•
Single button delegation to M/E 1, 2, 3, or PGM/PST.
•
Five pages of 20 registers allows access to all 100 registers.
•
Register, page, and E-MEM readout display.
•
Run and Auto Run controls.
Installation
The dimensions in
Figure 2
allow clearance for sheet metal and fasteners,
and provide top plate overlap of approximately 0.6 in. (15 mm) on all sides.
If the mounting surface is 0.75 in (19 mm) or less in thickness, the mounting
nuts will not need to be countersunk (
Figure 2
). Refer to
Figure 3
for exact
screw placement and sheet metal dimensions.
S H O T B O X
M/
M/E 1
M/
M/E 2
M/
M/E 3
P/
P/P
Misc 1
Misc 1
Misc 2
Misc 2
Misc 3
Misc 3
Misc 4
Misc 4
Misc 5
Misc 5
Misc 6
Misc 6
Misc 7
Misc 7
DPM
DPM
SS A
SS A
SS B
SS B
SS C
SS C
All
All
M/E
M/E
1
Page
Page
Auto
Auto
Run
Run
Run
Run
0
1
2
3
8
9
10
10
11
11
16
16
4
5
6
7
13
13
14
14
15
15
12
12
17
17
18
18
19
19
M/E
M/E
2
M/E
M/E
3
0721_07_65_r1