Grass Valley Fibre Channel Switch User Manual
Page 12
12
Fibre Channel Switch Installation Manual
29 January 2007
Welcome
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
AdminState
(1=Online, 2=Offline, 3=Diagnostics)
[Online]
BroadcastEnabled
(True / False)
[True]
InbandEnabled
(True / False)
[True]
FdmiEnabled
(True / False)
[True]
FdmiEntries
(decimal value, 0-1000)
[1000]
DefaultDomainID
(decimal value, 1-239)
[2]
DomainIDLock
(True / False)
[True]
SymbolicName
(string, max=32 chars)
[SANbox]
R_A_TOV
(decimal value, 100-100000 msec)
[2000]
E_D_TOV
(decimal value, 10-20000 msec)
[1000]
PrincipalPriority
(decimal value, 1-255)
[254]
ConfigDescription
(string, max=64 chars)
[FC-SCSI Config]
InteropMode
(0=Standard, 1=Interop_1)
[Standard]
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config activate command) before it can take effect.
To discard this configuration use the config cancel command.
10.Type the following command to save your configuration:
SANbox (admin-config) #> config save
11.Type the following command to activate your configuration:
SANbox (admin-config) #> config activate
12. Confirm activation of the configuration when prompted.
13.Type the following commands to view the threshold advanced settings:
sb2_16port #> admin start
sb2_16port (admin) #> config edit
sb2_16port (admin-config) #> set config threshold
14. Verify that the ThesholdMonitoringEnabled setting is False, or modify it if needed.
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
ThresholdMonitoringEnabled
(True / False)
[False]
q
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config activate command) before it can take effect.
To discard this configuration use the config cancel command.