Grass Valley K2 Media Client Field Kit Upgrade Instruction Manual Sep.24 2007 - Manual (Page 4)

4 K2 Media Client Field Kit Upgrade Instructions August 3, 2007
K2 Media Client Field Kit Upgrade Instructions
5. Remove the codec board as illustrated.
A mezzanine board is attached by four screws, which are accessed from the top side
of the codec board. Do not remove these screws while removing the codec board.
1 2 Remove screw Pull cover toward
rear 2 cm to release,
then lift off
Remove six screws*
* Do not remove any
of the mezzanine
board screws.
2
Disconnect
power cables 1
Disengage from RTP
board 3
Lift board gently from
chassis, then reach
under and disconnect
XLR board cable 4