Grass Valley K2 Dyno PA v.1.5 - Manual (Page 46)

Deleting a rule
In the Rules pane, right-click the rule you want to delete and select Delete .
Checking an asset for rules
You can check an asset to see if any rules have been applied to it, and you can release
the asset from complying with a rule.
1. In the Navigator pane, right-click on the asset and select Rules .
The Asset Rules Management dialog box displays.
2. To remove the rule from the asset, highlight the rule and click the Reset Rule button.
The rule is no longer displayed under Rules Applied to Asset.
3. Click the Close button.
Canceling an active transfer
In the Rules pane, right-click the rule causing the transfers, and select Cancel active
transfers .
The active transfer is canceled. However, the rule is not inactivated.
Transferring scheduled assets
The Scheduled Transfer feature lets you set up transfers ahead of time through K2
Dyno PA. Only Quicktime export is supported.
Prerequisites:
• A file system repository must have been added to the Dyno PA client.
• Because the time and date of the record are determined by the K2 system, while
the time and date in Transfer Scheduler are determined by the PC running the Grass
Valley platform service, these two machines must be in sync.
• The K2 system that serves as the source of the transfer must be set up so that a
record will be in progress at the time the transfer starts.
• The channel must not be in loop record.
1. Click the Scheduler tab.
The Transfer Scheduler pane displays.
46 Dyno Production Assistant User Manual 15 October 2010
Transferring Assets with K2 Dyno PA