Grass Valley IngestStation v.1.0 - Manual (Page 41)

Creating a Batch List
Digital News Production 39
Marking In and Out Points
Mark points are used to determine the length of a clip.
To set Mark In and Out Points:
1. Find the spot on the videotape where you want your clip to begin.
2. Mark an In Point using any of the following methods:
- Press I on your keyboard.
- Click the Mark In button on the IngestStation window.
- Type the timecode in the In field.
- Create a Mark In on the VTR.
3. Play through the tape until you reach the point where you want the clip to
end.
4. Mark an Out Point using any of these methods:
- Press O on your keyboard.
- Click the Mark Out button on the IngestStation window.
- Use the up or down arrows to find the correct timecode.
- Type the ending timecode in the Out field.
- Create a Mark Out on the VTR.
Sets a
Mark In
Point
Sets a
Mark Out
Point
Clears
Mark In
Point
Clears
Mark Out
Point
Shows
Duration
Moves to
Mark In
Point
Moves to
Mark Out
Point
of Clip