Grass Valley IngestStation v.1.0 - Manual (Page 34)

Chapter 3 Configuring Your System
32 Digital News Production
Setting Options Description
Select Channel Select the channel you want to configure from the list.
Channel Channel Name Enter a name for the channel. This name identifies the
IngestStation Channel Window.
On-Screen Video Source If using a router, select the router destination source; this is the
destination for video input to the video capture board.
VTR VTR Port Select the COM port for controlling the VTR
Router Source If using a router, select the router source for the VTR.
Main Recording Channel: Select DCOM or RS422 for the type of connection you have.
DCOM Media Server Enter the name or IP address of the M-Series or Profile server.
Recording Channel Name Enter the name of the channel you are using to record; for an
M-Series server, enter
0 or 2 ; for a Profile server, enter the
name of the channel, such as vtr1 .
Record Destination If using a router, select the router destination that is physically
connected to the Media Server’s recorder channel.
RS422 Recording Control Port Select the COM port for the recording channel.
Record Destination If using a router, select the router destination that is physically
connected to the Media Server’s recorder channel.
Use Backup Check this box if you are using a backup channel for recording.
Backup Recording Channel:
DCOM Media Server Enter the name or IP address of the M-Series or Profile server.
Recording Channel Name Enter the name of the channel you are using to record; for an
M-Series server, enter
0 or 2 ; for a Profile server, enter the
name of the channel, such as vtr1 .
Record Destination If using a router, select the router destination that is physically
connected to the Media Server’s recorder channel.
RS422 Recording Control Port Select the COM port for the recording channel.
Record Destination If using a router, select the router destination that is physically
connected to the Media Server’s recorder channel.