Grass Valley IngestStation v.1.0 - Manual (Page 26)

Chapter 2 Installing IngestStation
24 Digital News Production
Installing the IngestStation Hardware
To install the IngestStation hardware:
1. Install the video capture board in your computer and install the driver for the
board.
2. If necessary, install the RS-422 board in your computer and install the driver
for the board.
3. If you are going to be connecting several VTRs to IngestStation, you may
want to install and use the RS-422 breakout box, which connects to the
RS-422 board in the IngestStation computer.
4. Connect the video capture board’s S-Video Input connector to the device
you’re using for on-screen video display (VTR, router, or switch box).
5. Connect the VTR(s) to the computer via RS-422 (either directly to the board
or through the breakout box).
Installing the IngestStation Software
To install the IngestStation software on your computer, insert the IngestStation
CD-ROM into the machine’s CD-ROM drive and follow these instructions:
On this screen... Do this...
Welcome Click Next .
Choose Destination
Location Click Next .
Select Server Type Select the type of media server you are using with IngestStation—
MSeries or Profile .
Select Program
Manager Group Click Next .
Start Installation Click Install .
Installation Complete Click Finish .