Grass Valley iControl V.4.00 - Manual (Page 12)

8
iControl Upgrade Guide
After the Upgrade 1
8. Using the same login credentials (user name: miranda , password: icontrol ), open PuTTY to
establish a superuser SSH connection with the iControl Application Server (see "Using PuTTY", on
page 3 ).
9. Unzip the upgrade installer file in the directory /home/miranda on the Application Server by
typing the following command:
unzip 446-20G01-400.zip
10.If prompted to overwrite icontrol.sh , type y (yes), then press <Enter>.
11.Run the installer on the Application Server by typing the following command:
sh icontrol.sh
12.Type reboot , and then press <Enter> to reboot your iControl Application Server.
13.Type exit , and then press <Enter> to end the superuser session.
14.Type exit again, and then press <Enter> to close the PuTTY command line window.
Congratulations! You have successfully installed iControl version 4.00.
After the Upgrade
1. If you get error message dialogs when trying to open a site or display a page in iC Web runtime, then
the Web sites created in previous versions MUST be re-saved using iC Creator. Some XML format
incompatibilities could have been introduced in older sites. Re-saving them will fix the file format.
2. If you upgraded from iControl version 2.7x to version 4.00, recreate the log database schema by using
the Clear database option from the Log Viewer window. The log database will be cleared and the
database schema recreated.
Upgrading from iControl Version 3.xx
Upgrading to the current version from an earlier 3.xx version of iControl can be performed by using
iControl’s Webmin management tool (a Web user interface).
To upgrade from iControl version 3.xx:
1. Download the 446-20G01-400.zip file to your PC.
2. On the iControl Startup page, click System Tools.
The System Tools page appears.
3. On the System Tools page, click Administration.
The Login to Webmin window appears.
See also
For more information, see the “Events & Incident Logs” chapter of the iControl version 4.00
User’s Guide, available from the iControl Startup page via the Documentation link.