Grass Valley K2 Edge User Manual v.4.1 - Manual (Page 45)

K2 Edge User Manual - document version: 4.1 – Page 45
18
Appendix: Changing an IP-address
After changing the playout nodes’, TX/MAM or FTP-servers’ IP-address, following
adjustments need to be made:
18.1 After changing the IP-address of the playout nodes
1) Change the playout node’s IP-address in the TX/MAM Channel settings.
18.2 After changing the virtual IP-address of the TX/MAM-servers
1) On the K2Edge nodes, in /etc/hosts adjust MAIN-DB. Specify the virtual IP of the
TX/MAM servers.
Example:
10.250.51.51 MAIN-DB
You can also set the IP-address of the TX/MAM server via the IP Manager.
2) On both the TX/MAM servers, in /usr/local/apache2/application/configs/txmam.ini ,
adjust project_options.serverip. Specify the virtual IP of the TX/MAM servers.
Example:
project_options.serverip = "10.250.51.51"
3) On both the TX/MAM servers, in /usr/local/apache2/application/configs/txmam.ini ,
adjust ingest.assetHostIp. Specify the virtual IP of the TX/MAM servers.
Example:
ingest.assetHostIp = "10.250.51.51"
4) To change the IP-address in the POC desktop shortcut properties
Right-click the POC icon on your desktop > Properties > Shortcut.
In the Target field fill in the TX/MAM servers’ virtual IP-address.