Grass Valley K2 Edge User Manual v.4.1 - Manual (Page 17)

K2 Edge User Manual - document version: 4.1 – Page 17
8.10 System monitoring > Fans
Displays fan speed in rounds per minute.
8.11 System monitoring > UDP Monitoring

UDP Monitoring: use this option to monitor Channel 0 (the single HD or SD Channel, or the HD
Channel in a simulcast setup) via IP. When enabled, a MPEG- transport stream with encoded
video, graphics, subtitles and audio (first stereo track) is sent over Ethernet using the UDP-
protocol. A video player such as VLC is installed on a workstation to view output.
The UDP-monitoring option is described in more detail in the K2 Edge User Manual.

Resolution: 320x240/ 240x180/ 160x120

Aspect Ratio: 4:3/ 16:9

Video Bitrate: in kbit/s

Audio Enabled: On/Off

Audio Bitrate: in kbit/s

Ethernet Output: select On to enable monitoring and start streaming, Off to disable.

IP-address: IP-address of the target workstation (can be a multicast address)

IP-port: port the player will listen to. Default 4000