Grass Valley K2 Edge User Manual v.4.1 - Manual (Page 13)

K2 Edge User Manual - document version: 4.1 – Page 13
8.4 System configuration > Network configuration

Hostname: the K2 Edge hostname

IP-manager: specify network settings for the IP Manager. Note that the IP Manager has its own
IP-address.

Use DHCP: On/Off

IP-address

Netmask

Gateway

Nameserver

K2Edge: specify network settings for the K2 Edge server

Network port
 Method: Auto, using DHCP/Manual or Manual
 IP-Address
 Netmask

The system’s MAC address is displayed.

Gateway

Nameserver

TX/MAM server virtual IP: the TX/ MAM servers’ virtual IP-address
8.5 System configuration > Channel configuration

Video Bypass: enable (activate) or disable the bypass

Channel layout: select one of the following presets:

1xSD (1) : single SD (with preset 1)

1xSD (2) : single SD (with preset 2)

1xHD (1) : single HD (with preset 1)

1xHD (2) : single HD (with preset 2)

1xSD+preview (1) : single SD + preview (preset 1)

1xSD+preview (2) : single SD + preview (preset 2)

1xHD+preview (1) : single HD + preview (preset 1)

1xHD+preview (2) : single HD + preview (preset 2)

Simulcast

Custom setup

Region: select PAL or NTSC

HD-format: for HD-channels, select 720p or 1080i