Grass Valley 3000 PowerPlus - Manual (Page 28)

24
PowerPlus 3000
User Guide
HDX Fiber Connectors
Important Note
Regarding Use of Powered OpticalCON connector with PowerPlus & HDX System
At HDX power levels (>95VDC), the powered OpticalCON connector is suitable for indoor
(studio) camera links only, under specific conditions according to IEC 60664-1 “Pollution
Degree 1,” where there is zero humidity, zero expected condensation and zero conductive
pollution.
The powered OpticalCON connector is NOT suitable for outdoor/field use where
humidity/condensation may be present. For detailed information, ask for the Neutrik White
Paper "OpticalCON Camera Applications Using Hybrid SMPTE Cables Where Voltage
Exceeds 50V".
HDX Powered Fiber Connector Options
SMPTE 304M Panel Mounted Plug OpticalCON Receptacle
Indoor only: Pollution Degree 1
(see Important Note on page 24).
HDX Unpowered Fiber Connector
ST Receptacles OpticalCON Receptacle MX Receptacle