Grass Valley 3000 PowerPlus - Manual (Page 11)

7
PowerPlus 3000
User Guide
Mounting the PowerPlus
When mounting the CopperHead Camera Unit & PowerPlus, always position the camera so
that the battery mounting plate at the rear of the camera is easy to access. Ensure that the
camera is well supported and stable. If a battery is mounted, remove it.
Fig. 2-4: Mounting the PowerPlus Unit to the CopperHead Camera Unit
To mount the camera unit
1 Attach the CopperHead Camera Unit (A) to the camera's battery mounting plate (B).
The mounting is mechanically identical to attaching a battery to the camera.
2 Mount the PowerPlus (C) to the CopperHead Camera Unit battery mounting plate (D)
exactly as you would mount a battery to the camera.
3 Connect the PowerPlus dongle (E) to the fiber optic swivel F on Camera Unit (A).
Connect the SMPTE hybrid cable connector (G) from the HDX to the SMPTE receptacle
(H) on the PowerPlus.