Grass Valley 3000 PowerPlus - Manual (Page 16)

12
PowerPlus 3000 Components
Camera Power Adaptor
*At HDX power levels (>95VDC), the powered OpticalCON connector is suitable for indoor
(studio) camera links only (see
PowerPlus Fiber Connectors on page 23).
8 12 Volt Auxiliary Output:
4-Pin XLR output connector for 12
Volt accessories 12 SMPTE Swivel:
Adjustable swivel for Hybrid Fiber
receptacle am.
9 24 Volt Auxiliary Output B:
3-pin connector for 24 Volt
accessories. 13 Hybrid Fiber Receptacle (SMPTE
304M shown):
Connect the SMPTE hybrid cable here.
This cable connects to the HDX.
Available with the following
termination:
• SMPTE 304M plug (shown)
• OpticalCON Connector*
10 24 Volt Auxiliary Output A:
3-pin connector for 24 Volt
accessories 14 Tactical Fiber Connector (MX shown):
Dry fiber connector at the end of the
dongle, matching the connector on
the swivel of the mating CopperHead
Camera Unit.
Available with the following
termination:
• MX plug (shown)
• OpticalCON Connector ("dry")
• SMPTE 304M plug ("dry")
No. Description No. Description