Grass Valley 3000 PowerPlus - Manual (Page 18)

14
PowerPlus 3000 Components
HDX Status Indicators
HDX Status Indicators
Fig. 3-4: HDX Displays
The LED Status Indicators will illuminate under "Normal" and Error" conditions as shown:
• 1- AC IN - MAINS: AC Input power is
present
• 2 - DC HV ENABLE: DC "Sense" voltage
from PowerPlus is present
• 3 - AC HV ENABLE: AC "Sense" voltage
from PowerPlus is present (not used with
PowerPlus)
• 4 - HV Present: DC voltage is available on
Hybrid connector
• 5 - CABLE OPEN: There is no electrical
connection to the PowerPlus unit.
• 6 - CABLE SHORT: A short circuit is
detected in the SMPTE Hybrid Cable.
High voltage is disabled until this
condition is corrected
• 7 - REMOTE PWR ENABLE: Not used
with PowerPlus
• 8 - LOAD TYPE: Indicates the type of
load or camera being used:
• N/A - No load detected
• PWR+ - PowerPlus detected
Note: Upon power Up, this displays
firmware version for two seconds
• 9 - Optical Power: Not used with
PowerPlus.
• 10 - Local Remote: Not used with
PowerPlus.
Normal Not Connected Cable Short
AC IN Green Green Green
DC HV ENABLE Green Red Red
AC HV ENABLE Unlit Red Red
HV PRESENT Green Unlit Unlit
CABLE OPEN Unlit Red Unlit
CABLE SHORT Unlit Unlit Red
REMOTE PWR ENABLE Unlit Unlit Unlit